Discussion in "8051 Discussion Forum" started by    wounder    Jan 25, 2020.
Sat Jan 25 2020, 12:14 PM
#1
I have a 8051 micro controller ,it has timer0,1,2,3 with different modes.

in timer0,mode0, i got a sample code (as shown below).

from that code

TH0_INIT=0xFC //5.0ms@XTAL=12MHz, Period = (10.85/2) ms@XTAL=22.1184MHz TL0_INIT=0x0F

both TH0,TL0 load with hex values..but could not derive these values from equation below .. (https://exploreembedded.com/wiki/5.8051_Timer_programming) Could you please tell me ,how these hex values derive ??

tick = (1/(Fosc/12)

tick = 12/Fosc$$ For Fosc == 11.0592Mhz, the tick time will be

tick = 12/11.0592M = 1.085069444us = 1.085us

Now the Timer value for the required delay can be calculated as below.

Delay = TimerCount * tick

Count = (Delay/tick)

RegValue = TimerMax- Count RegValue = TimerMax-(Delay/tick) = TimerMax - (Delay/1.085us)

RegValue = TimerMax-((Delay/1.085) * 10^6)$$


#include "SFR_Macro.h"
#include "Function_define.h"

#define TH0_INIT 0xFC //5.0ms@XTAL=12MHz, Period = (10.85/2)
ms@XTAL=22.1184MHz
#define TL0_INIT 0x0F


void Timer0_ISR (void) interrupt 1 //interrupt address is 0x000B
{
TH0 = TH0_INIT;
TL0 = TL0_INIT;
P12 = ~P12; // GPIO
toggle when interrupt
}



void main (void)
{
TMOD = 0XFF;
Set_All_GPIO_Quasi_Mode;
TIMER0_MODE0_ENABLE;


clr_T0M;
clr_T1M;

TH0 = TH0_INIT;
TL0 = TL0_INIT;


// set_ET0; //enable Timer0 interrupt
//enable Timer1 interrupt
set_EA; //enable interrupts

set_TR0; //Timer0 run


while(1)
{
TH0 = TH0_INIT;
TL0 = TL0_INIT;
set_TR0;
while(!TF0);
clr_TR0;
P12 = ~P12;
TF0 = 0 ;
}
}
Sun Jan 26 2020, 04:05 AM
#2
For a 12MHz crystal using a normal divided by 12 clock.

For a 5mS delay I get
TH0_INIT=0xEC
TL0_INIT=0x78
What do you get ?

The program you posted uses polling and an interrupt to monitor the timer
and toggle P12, choose one, you can't (at least shouldn't) do both.

Get Social

Information

Powered by e107 Forum System

Conversation

Mon Dec 06 2021, 05:17 PM
Iola Gott
I'd like to ask you a question. Would you be interested in having me promote your site and you don't have to pay unless I get you results? Can we do a call this week so I can explain how it works? Email me here: jinatreadwellsr10@gmail.com
Sun Dec 05 2021, 09:58 PM
Sophia Scott
Click the link below to view the message and reply to her.
Sun Dec 05 2021, 07:22 PM
Kia
Hello there! This post could not be written much better! Going through this article reminds me of my previous roommate! He always kept preaching about this. I most certainly will send this post to him. Fairly certain he'll have a very good read. Thank you for sharing! https://comprarcialis5mg.org/it/cialis-5-mg-effetti-collaterali/ http://beans.s24.xrea.com/cgi-bin/apeboardp/apeboard_plus.cgi effetti collaterali del cialis 20 mg
Sun Dec 05 2021, 06:59 PM
Amelie
Heya i am for the first time here. I came across this board and I in finding It really useful & it helped me out a lot. I hope to give something again and aid others like you helped me. https://comprarcialis5mg.org/it/comprare-spedra-avanafil-senza-ricetta-online/ http://bsiuntag-sby.com/halkomentar-175-posting-blog-melalui-microsoft-576.html spedra ravenna
Sat Dec 04 2021, 07:47 PM
cjeeoeajau
hotlnflsty

Downloads

Comments

Mirza123
Thu Jun 25 2020, 03:46 PM
eunicelove124
Mon Jun 22 2020, 03:03 PM
cerouno
Tue Jun 16 2020, 05:10 PM
Marce
Sat Jun 13 2020, 09:43 PM
Davidthils
Thu May 21 2020, 12:44 PM
Jakeror
Thu May 21 2020, 01:28 AM
motorCar
Wed May 20 2020, 07:05 PM
Vordrync
Wed May 20 2020, 11:52 AM

Online

Guests: 72, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 38215
Newest member: Mirza123